Zurn Wilkins 1-NR3XL 1" Pressure Reducing Valve
Free Shipping Included! Zurn Wilkins 1-NR3XL 1'' Pressure Reducing Valve by Zurn at Hosted Payload. MPN: 1-NR3XL. Hurry! Limited time offer. Offer valid only while supplies last. Zurn Wilkins 1'' Pressure Reducing Valve, Lead-Free, FNPT Union x FNPT (Only One Union is Included. If two unions are needed, Please order Zurn 1-NR3XLDU). Designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure. The integral strainer makes this device most suitable for residential and commercial water systems that require frequent cleaning of sediment and debris. The direct acting integral by-pass design prevents buildup of excessive system
Product Description & Reviews
Zurn Wilkins 1" Pressure Reducing Valve, Lead-Free, FNPT Union x FNPT (Only One Union is Included. If two unions are needed, Please order Zurn 1-NR3XLDU). Designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure. The integral strainer makes this device most suitable for residential and commercial water systems that require frequent cleaning of sediment and debris. The direct acting integral by-pass design prevents buildup of excessive system pressure caused by thermal expansion. The balance piston design enables the regulator to react in a smooth and responsive manner to changes in system flow demand, while at the same time, providing protection from inlet pressure changes
Features & Highlights
- Designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure
- Integral strainer makes this device most suitable for residential and commercial water systems that require frequent cleaning of sediment and debris
- Direct acting integral by-pass design prevents buildup of excessive system pressure caused by thermal expansion
- Balance piston design enables the regulator to react in a smooth and responsive manner to changes in system flow demand
- Provides protection from inlet pressure changes
|Item Weight:||2.56 pounds|
|Item Size:||2.5 x 6.25 x 6.25 inches|
|Package Weight:||2.6 pounds|
|Package Size:||5.7 x 2.7 x 2.7 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Zurn, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
IMPORATANT: THIS 13MM SIZE VALVE IS **NOT** FOR DRIP IRRIGATION. FOR 1/2 INCH DRIP IRRIGATION TUBING, BUY OUR 16MM SIZE VALVE.Product Features: Simple on-off operation and straight through flow Operating pressure range 0 to 45 PSI at a temperature to 100°F Rapid quarter turn on-off operation Single barb inlet and outlet For low pressure applications Things to consider when installing valves in your system include: Selecting the correct barb size to match your tubing (see sizing chart)
Product Features:One stainless steel mini ball valve Heavy duty construction Temperature range: -68 to 356 ℉ Fast 1/4 turn open or closed operationConnections: Female x Male1.Heavy duty construction.316 1/4'' ball valve. 2.Material: Stainless Steel 316. 3.NPT threads, Male threaded pipe to Female threaded pipe fittings. 4.Lever handle for on/off manual control, Can be used for Oil, Gus or Drinking water.. 5.Working pressure:1000 PSI, Working temperature: -68-356 ℉.
mpn: 700-15F, ean: 0019079701565,
This Valterra 700-15F ball valve is made of white schedule 40 PVC (polyvinyl chloride) for strength and resistance to corrosion and mild chemicals, and is suitable for use as an inline valve for connecting two pipes going in the same direction. It has a replaceable easy grip handle, a maximum operating pressure of 150 pounds per square inch (psi), and two 1-1/2'' female National Pipe Taper (NPT) threaded connections. This ball valve is suitable for use with landscape and irrigation, pool and
By Smith-Cooper International
mpn: 0209CV30KL, ean: 0092201383396,
The Smith-Cooper International CV30L series check valve for potable water service is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. It has ethylene propylene diene monomer (EPDM) seat and seal, stainless steel spring, spring-loaded poppet, and female National Pipe Taper (NPT) connections on both ends. Female NPT threads connect to male threaded pipes, creating a
mpn: VGV1LHT2BB, ean: 0879420001429,
1 piece body, CSA 3-88 certified, CSA certified. Chrome plated forged brass ball. 3/8'' x 3/8'' Flare x flare 1 piece body CSA 3-88 certified CSA certified Forged brass gas ball valve Chrome plated forged brass ball.1-Piece forged brass body. 1/2 PSIG and 5 G. CSA CR91-002 Certified for use on piping; ANSI Z21.15 / CSA 9.1 Certified for appliances and appliance connectors. ASME B16.44 Certified for use in above ground piping systems up to 5 PSI. Made in Italy.
By Source 1 Drainage
mpn: PLCD, ean: 0712392792486,
Remove unwanted surface water from your garage, pool or patio with the Source 1 Drainage Channel Trench Drain Combo Pack with plastic concrete gray grates. This 10 ft. long, 5 in. high combo pack provides a perfect long-term solution for the collection and dispersal of surface water. Class B rated this product is perfect for cars, trucks, vans and light duty vehicles traveling at speeds under 20mph. The Source 1 Drainage channel drain features easy to snap in and out plastic gray grates that
i Flow H2O Check Valve 1/2”inch,Barbed plastic,Pex Tubing,Fish Aquarium Filter Pump,Boat Marine,Hydroponics Grow,Potable Water,Anti-Back Flow,One-Way,RV,Hydronic heat, Actual Barb Size(OD)-15/32"inch
By i Flow H2O
WARNING! Attention to ''ACTUAL SIZE'' for barb-size 15/32''inch=Premium USA Quality 15/32'' Check Valve Posi-Seal Anti-Back Flow=This high performance anti-leak check valve will solve your back-flow problems, install it and forget it! Its high strength super advanced ''PTFE'' solid ball and a''Viton/FKM''-''O''- Ring encased by a poly-alloy durable plastic that can withstand operating pressures of up to 200psi and high temperatures of up to 200F. ''All time highest ratings in its Class''.
mpn: 2W025-08/DC12V NPT,
2 way solenoid valve, 14/'' NPT port, brass body, DC12 volt. High quality normally closed electric solenoid valve, for water, air or oil. Working temperature range: -5℃-85℃. It's applicable in many fields: Irrigation controls (garden, farm,etc.), liquid controls ( pipeline, artificial river etc. and air controls ( lab, factory, etc.). We have solenoids available in AC/DC and various size NPT threads as well.
BACOENG VITON Normally Closed Electric Solenoid Valve;3/8''ports, BRASS body, Viton seals, 12 volt DC, for air, water, or fuelThis electric solenoid valve is constructed with a high-quality brass body, two-way inlet and outlet ports with one-quarter inch (3/8'') female threaded (NPT) connections, and heat and oil resistant Viton seals.The coil uses alternating current and energizes at 12 volts DC; voltage range + or - 10%. 18 Watt power rating.Direct lift valve operates from 0 PSI to a
mpn: 700-20, ean: 0019079707000,
Ball Valves are used to regulate water flow through a pipe. They allow for complete flow when fully open.PVC for less weight than valves made from metals. Easy grip, replaceable handle. Full port flow for higher operating efficiency than standard port. Inline valve for connecting two pipes going in the same direction. Slip connection for connecting to unthreaded pipe.