Smith-Cooper International CV30L Series Brass Check Valve, Potable Water Service, 1" NPT Female
Smith-Cooper International CV30L Series Brass Check Valve, Potable Water Service, 1'' NPT Female by Smith-Cooper International at Hosted Payload. MPN: 0209CV30KL. Hurry! Limited time offer. Offer valid only while supplies last. The Smith-Cooper International CV30L series check valve for potable water service is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. It has ethylene propylene diene monomer (EPDM) seat and seal, stainless steel spring, spring-loaded poppet, and female National Pipe Taper (NPT) connections on both ends. Female NPT threads connect to male threaded pipes, creating a
Product Description & Reviews
The Smith-Cooper International CV30L series check valve for potable water service is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. It has ethylene propylene diene monomer (EPDM) seat and seal, stainless steel spring, spring-loaded poppet, and female National Pipe Taper (NPT) connections on both ends. Female NPT threads connect to male threaded pipes, creating a tighter seal than straight threads. The cracking pressure is 2 pounds per square inch (psi), and the maximum pressure rating is 200 psi. This valve meets National Sanitation Foundation (NSF)/American National Standards Institute (ANSI) 61-8 for quality assurance, and is certified to California AB1953Check valves have two ports and restrict the flow of fluids and other loose materials through a pipe or passageway to one direction. Flow enters through one port and exits through the other, closing when flow reverses or stops. Two common types of check valves are ball cone valves and swing check valves. A ball cone valve utilizes a spring-loaded ball seated against a cone-shaped interior surface to stop the flow of fluid in a forward direction, and a swing check valve has a movable disc on a hinge to block reverse flow. Check valves are rated by their cracking pressure (the minimum upstream pressure required for the valve to operate), and they are used in various water, gas, air, and steam lines.Smith-Cooper manufactures a wide variety of pipe fittings and valves. The company is headquartered in Commerce, California, and meets relevant ANSI, ASTM, and International Organization for Standardization (ISO) 9002 standards.
Features & Highlights
- Made from brass for higher corrosion resistance than steel
- Includes EPDM seat and seal, stainless steel spring, and spring-loaded poppet
- Female NPT threads for connecting to male threaded pipes
- Cracking pressure is 2 psi and maximum pressure rating is 200 psi
- Meets NSF/ANSI 61-8 for quality assurance and is certified to California AB1953
|Package Weight:||1 pounds|
|Package Size:||1.8 x 1.8 x 1.8 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Smith-Cooper International, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: VGV1LHT2BB, ean: 0879420001429,
1 piece body, CSA 3-88 certified, CSA certified. Chrome plated forged brass ball. 3/8'' x 3/8'' Flare x flare 1 piece body CSA 3-88 certified CSA certified Forged brass gas ball valve Chrome plated forged brass ball.1-Piece forged brass body. 1/2 PSIG and 5 G. CSA CR91-002 Certified for use on piping; ANSI Z21.15 / CSA 9.1 Certified for appliances and appliance connectors. ASME B16.44 Certified for use in above ground piping systems up to 5 PSI. Made in Italy.
By Source 1 Drainage
mpn: PLCD, ean: 0712392792486,
Remove unwanted surface water from your garage, pool or patio with the Source 1 Drainage Channel Trench Drain Combo Pack with plastic concrete gray grates. This 10 ft. long, 5 in. high combo pack provides a perfect long-term solution for the collection and dispersal of surface water. Class B rated this product is perfect for cars, trucks, vans and light duty vehicles traveling at speeds under 20mph. The Source 1 Drainage channel drain features easy to snap in and out plastic gray grates that
i Flow H2O Check Valve 1/2”inch,Barbed plastic,Pex Tubing,Fish Aquarium Filter Pump,Boat Marine,Hydroponics Grow,Potable Water,Anti-Back Flow,One-Way,RV,Hydronic heat, Actual Barb Size(OD)-15/32"inch
By i Flow H2O
WARNING! Attention to ''ACTUAL SIZE'' for barb-size 15/32''inch=Premium USA Quality 15/32'' Check Valve Posi-Seal Anti-Back Flow=This high performance anti-leak check valve will solve your back-flow problems, install it and forget it! Its high strength super advanced ''PTFE'' solid ball and a''Viton/FKM''-''O''- Ring encased by a poly-alloy durable plastic that can withstand operating pressures of up to 200psi and high temperatures of up to 200F. ''All time highest ratings in its Class''.
mpn: 2W025-08/DC12V NPT,
2 way solenoid valve, 14/'' NPT port, brass body, DC12 volt. High quality normally closed electric solenoid valve, for water, air or oil. Working temperature range: -5℃-85℃. It's applicable in many fields: Irrigation controls (garden, farm,etc.), liquid controls ( pipeline, artificial river etc. and air controls ( lab, factory, etc.). We have solenoids available in AC/DC and various size NPT threads as well.
BACOENG VITON Normally Closed Electric Solenoid Valve;3/8''ports, BRASS body, Viton seals, 12 volt DC, for air, water, or fuelThis electric solenoid valve is constructed with a high-quality brass body, two-way inlet and outlet ports with one-quarter inch (3/8'') female threaded (NPT) connections, and heat and oil resistant Viton seals.The coil uses alternating current and energizes at 12 volts DC; voltage range + or - 10%. 18 Watt power rating.Direct lift valve operates from 0 PSI to a
mpn: 700-20, ean: 0019079707000,
Ball Valves are used to regulate water flow through a pipe. They allow for complete flow when fully open.PVC for less weight than valves made from metals. Easy grip, replaceable handle. Full port flow for higher operating efficiency than standard port. Inline valve for connecting two pipes going in the same direction. Slip connection for connecting to unthreaded pipe.
By American Valve
mpn: G31SL 3/4, ean: 0611918102054,
The American Valve G31SL is a lead-free spring check valve with female threaded ended. This in line check valve is designed to prevent backflow. It may be used vertically or horizontally.Complies with lead-free Plumbing laws. May be used vertically or horizontally. 200 WOG (water, Oil, gas). Inline check.
mpn: 2201X, ean: 0019079922014,
One piece PCV UniBody configuration. Stainless steel shafts prevent rust or corrosion. Locking handle provides positive shut off and easy gate opening. Maximum recommended working pressure is 50 psi. Solvent Cement traps to prevent from over gluing.One piece PVC UniBody configuration. Stainless steel shafts prevent rust or corrosion. Locking handle provides positive shut off and easy gate opening. Maximum recommended working pressure is 50 psi. Solvent Cement traps to prevent from over gluing.
By Duda Energy
mpn: 2PCBV-WOG200-F075, ean: 0840194100014,
2-Piece Stainless steel ball valves with PTFE seals & seats by Duda Energy Duda Energy Stainless steel ball valves with PTFE (Teflon) seats & seals offer excellent corrosion resistance for most applications. Stainless steel & PTFE work well in applications including but not limited to water, oil, gas/air, light alkali's and acids, biodiesel, fuels and alcohols. These ball valves are fitted with tight seals to ensure no leakage and a long lasting seal after many years of frequent usage. All
By U.S. Solid
mpn: USS2-00005, ean: 0853996003285,
All blue cap valves are designed with new polymer formula engineered to withstand 20% more tightening torque without cracking the polymer body. U.S. Solid Normally Closed Electric Solenoid Valve; 1/4'' ports, engineering plastic(Nylon) body, nitrile rubber (NBR) seal, 12 volt DC, for air, water U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a Nylon, engineering plastic body, two-way inlet and outlet ports with one-quarter inch (1/4'') female threaded (NPT)