Smith-Cooper International 9191 Series Brass Swing Check Valve, 2" NPT Female, Non-Potable Water Use Only
Free Shipping Included! Smith-Cooper International 9191 Series Brass Swing Check Valve, 2'' NPT Female, Non-Potable Water Use Only by Smith-Cooper International at Hosted Payload. MPN: 01739191N. Hurry! Limited time offer. Offer valid only while supplies last. The Smith-Cooper International 9191 series swing check valve is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. It has a forged brass disc and female National Pipe Taper (NPT) connections on both ends. Female NPT threads connect to male threaded pipes, creating a tighter seal than straight threads. This valve has maximum pressure ratings of 200 pounds per square
Product Description & Reviews
The Smith-Cooper International 9191 series swing check valve is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. It has a forged brass disc and female National Pipe Taper (NPT) connections on both ends. Female NPT threads connect to male threaded pipes, creating a tighter seal than straight threads. This valve has maximum pressure ratings of 200 pounds per square inch (gauge) (psig) for water, oil, and gas (WOG) and 125 psig for steam working pressure (SWP). The maximum working temperature is 350 degrees Fahrenheit. This valve meets National Sanitation Foundation (NSF)/American National Standards Institute (ANSI) 61-8 for quality assurance.Check valves have two ports and restrict the flow of fluids and other loose materials through a pipe or passageway to one direction. Flow enters through one port and exits through the other, closing when flow reverses or stops. Two common types of check valves are ball cone valves and swing check valves. A ball cone valve utilizes a spring-loaded ball seated against a cone-shaped interior surface to stop the flow of fluid in a forward direction, and a swing check valve has a movable disc on a hinge to block reverse flow. Check valves are rated by their cracking pressure (the minimum upstream pressure required for the valve to operate), and they are used in various water, gas, air, and steam lines.Smith-Cooper manufactures a wide variety of pipe fittings and valves. The company is headquartered in Commerce, California, and meets relevant ANSI, ASTM, and International Organization for Standardization (ISO) 9002 standards.
Features & Highlights
- Made from brass for higher corrosion resistance than steel
- Female NPT threads for connecting to male threaded pipes
- Maximum pressure ratings of 200 psig for WOG and 125 psig for SWP
- Maximum working temperature of 350 degrees Fahrenheit
- Meets NSF/ANSI 61-8 for quality assurance
- Product contains brass which does not meet federal and state requirements for drinking water.
|Package Weight:||2.75 pounds|
|Package Size:||5.1 x 3.1 x 3.1 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Smith-Cooper International, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By Robert Manufacturing
Standard Bob float valve assemblies consist of valve, brass stem, and float ball for positive water level control. Applicable for precision liquid level control, aggressive water applications, increased resistance to corrosion and chemicals, de-ionized, ultra pure, and reverse osmosis water, boiler feed water systems, kitchen steam tables, cooling towers, evaporative coolers, livestock waterier, car wash, high pressure wash, swimming pools, industrial tanks, food service and sanitary
mpn: DERNORD-179, ean: 0717643521686,
From the Manufacturer This Dernord mini ball valve is made of SUS304 for higher corrosion resistance, and has a blow-out proof stem to reduce leakage and valve damage. This standard port inline valve has female National Pipe Taper (NPT) threads for connecting two male threaded pipes going in the same direction. This mini ball valve at a maximum operating temperature of 325 degrees F, and is suitable for use in air, water or inert gas applications. Features: 1/4 Turn Shut-Off Temperature
mpn: 200-C15, ean: 0753610336952,
This Valterra 200-C15 check valve is made of clear schedule 40 PVC (polyvinyl chloride) for strength and resistance to corrosion and mild chemicals. Its EPDM (ethylene propylene diene monomer) seal resists degradation caused by water and oils, and the swing/spring construction of this valve makes it possible to install it in any position. It has a 1-1/2'' slip connection at each end, which must be fastened with glue, a maximum pressure rating of 150 pounds per square inch (psi), and a spring
mpn: IN-0111-002, ean: 0601715811310,
Product Name: ball valve Product Type: WDN15 Thread Size:1/2'' Body Material: ABS plastic gaskets EPDM Float material: PE Spool Material: NR Apply pressure: 0.02- 1.0 MPA Water temperature: -30 degrees Celsius to 70 degrees Celsius Valve total length: 15 cm, (excluding outer rib mouth 2.8CM)Product Name: ball valve. Product Type: WDN15. Thread Size:1/2''. Body Material: ABS plastic gaskets EPDM. Float material: PE Quantity:3 pcs.
ASCO's 2-Way solenoid valves have one inlet and one outlet, and are used to permit and shut off fluid flow. The two types of operations are Normally Closed (NC) and Normally Open (NO). Two types of constructions apply to 2-way solenoid valves, which are direct acting and internally piloted. With Direct acting constructions, the solenoid is energized, the core directly opens the orifice of a Normally Closed valve or closes the orifice in a Normally Open Valve. The valve will operate at pressures
mpn: 1-NR3XL, ean: 0612052076362,
Zurn Wilkins 1'' Pressure Reducing Valve, Lead-Free, FNPT Union x FNPT (Only One Union is Included. If two unions are needed, Please order Zurn 1-NR3XLDU). Designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure. The integral strainer makes this device most suitable for residential and commercial water systems that require frequent cleaning of sediment and debris. The direct acting integral by-pass design prevents buildup of excessive system
IMPORATANT: THIS 13MM SIZE VALVE IS **NOT** FOR DRIP IRRIGATION. FOR 1/2 INCH DRIP IRRIGATION TUBING, BUY OUR 16MM SIZE VALVE.Product Features: Simple on-off operation and straight through flow Operating pressure range 0 to 45 PSI at a temperature to 100°F Rapid quarter turn on-off operation Single barb inlet and outlet For low pressure applications Things to consider when installing valves in your system include: Selecting the correct barb size to match your tubing (see sizing chart)
Product Features:One stainless steel mini ball valve Heavy duty construction Temperature range: -68 to 356 ℉ Fast 1/4 turn open or closed operationConnections: Female x Male1.Heavy duty construction.316 1/4'' ball valve. 2.Material: Stainless Steel 316. 3.NPT threads, Male threaded pipe to Female threaded pipe fittings. 4.Lever handle for on/off manual control, Can be used for Oil, Gus or Drinking water.. 5.Working pressure:1000 PSI, Working temperature: -68-356 ℉.
mpn: 700-15F, ean: 0019079701565,
This Valterra 700-15F ball valve is made of white schedule 40 PVC (polyvinyl chloride) for strength and resistance to corrosion and mild chemicals, and is suitable for use as an inline valve for connecting two pipes going in the same direction. It has a replaceable easy grip handle, a maximum operating pressure of 150 pounds per square inch (psi), and two 1-1/2'' female National Pipe Taper (NPT) threaded connections. This ball valve is suitable for use with landscape and irrigation, pool and
By Smith-Cooper International
mpn: 0209CV30KL, ean: 0092201383396,
The Smith-Cooper International CV30L series check valve for potable water service is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. It has ethylene propylene diene monomer (EPDM) seat and seal, stainless steel spring, spring-loaded poppet, and female National Pipe Taper (NPT) connections on both ends. Female NPT threads connect to male threaded pipes, creating a