Dernord Stainless Steel Mini Ball Valve NPT Thread (1/8" Female&Male)
Dernord Stainless Steel Mini Ball Valve NPT Thread (1/8'' Female&Male) by Dernord at Hosted Payload. MPN: DERNORD-179. Hurry! Limited time offer. Offer valid only while supplies last. From the Manufacturer This Dernord mini ball valve is made of SUS304 for higher corrosion resistance, and has a blow-out proof stem to reduce leakage and valve damage. This standard port inline valve has female National Pipe Taper (NPT) threads for connecting two male threaded pipes going in the same direction. This mini ball valve at a maximum operating temperature of 325 degrees F, and is suitable for use in air, water or inert gas applications. Features: 1/4 Turn Shut-Off Temperature
Product Description & Reviews
From the Manufacturer This Dernord mini ball valve is made of SUS304 for higher corrosion resistance, and has a blow-out proof stem to reduce leakage and valve damage. This standard port inline valve has female National Pipe Taper (NPT) threads for connecting two male threaded pipes going in the same direction. This mini ball valve at a maximum operating temperature of 325 degrees F, and is suitable for use in air, water or inert gas applications. Features: 1/4 Turn Shut-Off Temperature range: -30°F to 325°F NPT size: 1/8INCH NPT type: Female and Male
Features & Highlights
- 1/8" NPT Female&Male threads for connecting to male threaded pipe fittings
- SUS304 body and ball for extra strength and corrosion resistance
- Inline valve for connecting two pipes going in the same direction with Double-seal system
- Heavy duty stainless handles to increase service life, fast 1/4 turn open or closed operation
- Standard port flow for smaller valve size, each valve individually tested for maximum safety about Water, Oil, and Gas(no freezing)
|Item Weight:||0.26 pounds|
|Package Weight:||0.26 pounds|
|Package Size:||2.99 x 2.95 x 2.95 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Dernord, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 200-C15, ean: 0753610336952,
This Valterra 200-C15 check valve is made of clear schedule 40 PVC (polyvinyl chloride) for strength and resistance to corrosion and mild chemicals. Its EPDM (ethylene propylene diene monomer) seal resists degradation caused by water and oils, and the swing/spring construction of this valve makes it possible to install it in any position. It has a 1-1/2'' slip connection at each end, which must be fastened with glue, a maximum pressure rating of 150 pounds per square inch (psi), and a spring
mpn: IN-0111-002, ean: 0601715811310,
Product Name: ball valve Product Type: WDN15 Thread Size:1/2'' Body Material: ABS plastic gaskets EPDM Float material: PE Spool Material: NR Apply pressure: 0.02- 1.0 MPA Water temperature: -30 degrees Celsius to 70 degrees Celsius Valve total length: 15 cm, (excluding outer rib mouth 2.8CM)Product Name: ball valve. Product Type: WDN15. Thread Size:1/2''. Body Material: ABS plastic gaskets EPDM. Float material: PE Quantity:3 pcs.
ASCO's 2-Way solenoid valves have one inlet and one outlet, and are used to permit and shut off fluid flow. The two types of operations are Normally Closed (NC) and Normally Open (NO). Two types of constructions apply to 2-way solenoid valves, which are direct acting and internally piloted. With Direct acting constructions, the solenoid is energized, the core directly opens the orifice of a Normally Closed valve or closes the orifice in a Normally Open Valve. The valve will operate at pressures
mpn: 1-NR3XL, ean: 0612052076362,
Zurn Wilkins 1'' Pressure Reducing Valve, Lead-Free, FNPT Union x FNPT (Only One Union is Included. If two unions are needed, Please order Zurn 1-NR3XLDU). Designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure. The integral strainer makes this device most suitable for residential and commercial water systems that require frequent cleaning of sediment and debris. The direct acting integral by-pass design prevents buildup of excessive system
IMPORATANT: THIS 13MM SIZE VALVE IS **NOT** FOR DRIP IRRIGATION. FOR 1/2 INCH DRIP IRRIGATION TUBING, BUY OUR 16MM SIZE VALVE.Product Features: Simple on-off operation and straight through flow Operating pressure range 0 to 45 PSI at a temperature to 100°F Rapid quarter turn on-off operation Single barb inlet and outlet For low pressure applications Things to consider when installing valves in your system include: Selecting the correct barb size to match your tubing (see sizing chart)
Product Features:One stainless steel mini ball valve Heavy duty construction Temperature range: -68 to 356 ℉ Fast 1/4 turn open or closed operationConnections: Female x Male1.Heavy duty construction.316 1/4'' ball valve. 2.Material: Stainless Steel 316. 3.NPT threads, Male threaded pipe to Female threaded pipe fittings. 4.Lever handle for on/off manual control, Can be used for Oil, Gus or Drinking water.. 5.Working pressure:1000 PSI, Working temperature: -68-356 ℉.
mpn: 700-15F, ean: 0019079701565,
This Valterra 700-15F ball valve is made of white schedule 40 PVC (polyvinyl chloride) for strength and resistance to corrosion and mild chemicals, and is suitable for use as an inline valve for connecting two pipes going in the same direction. It has a replaceable easy grip handle, a maximum operating pressure of 150 pounds per square inch (psi), and two 1-1/2'' female National Pipe Taper (NPT) threaded connections. This ball valve is suitable for use with landscape and irrigation, pool and
By Smith-Cooper International
mpn: 0209CV30KL, ean: 0092201383396,
The Smith-Cooper International CV30L series check valve for potable water service is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. It has ethylene propylene diene monomer (EPDM) seat and seal, stainless steel spring, spring-loaded poppet, and female National Pipe Taper (NPT) connections on both ends. Female NPT threads connect to male threaded pipes, creating a
mpn: VGV1LHT2BB, ean: 0879420001429,
1 piece body, CSA 3-88 certified, CSA certified. Chrome plated forged brass ball. 3/8'' x 3/8'' Flare x flare 1 piece body CSA 3-88 certified CSA certified Forged brass gas ball valve Chrome plated forged brass ball.1-Piece forged brass body. 1/2 PSIG and 5 G. CSA CR91-002 Certified for use on piping; ANSI Z21.15 / CSA 9.1 Certified for appliances and appliance connectors. ASME B16.44 Certified for use in above ground piping systems up to 5 PSI. Made in Italy.
By Source 1 Drainage
mpn: PLCD, ean: 0712392792486,
Remove unwanted surface water from your garage, pool or patio with the Source 1 Drainage Channel Trench Drain Combo Pack with plastic concrete gray grates. This 10 ft. long, 5 in. high combo pack provides a perfect long-term solution for the collection and dispersal of surface water. Class B rated this product is perfect for cars, trucks, vans and light duty vehicles traveling at speeds under 20mph. The Source 1 Drainage channel drain features easy to snap in and out plastic gray grates that