CBK Authentic New Blue Pro K24 Turbine Digital Diesel Fuel Flow Meter For Chemicals Water
CBK Authentic New Blue Pro K24 Turbine Digital Diesel Fuel Flow Meter For Chemicals Water by CBK at Hosted Payload. MPN: K24. Hurry! Limited time offer. Offer valid only while supplies last. Specification: Model: K24 Application: Diesel, Adbule, Kerosene, Chemicals, Gasoline Inlet&Outlet: 1'' Accuracy: ±1% Repeatablity: ±0.5% Max
Application: Diesel, Adbule, Kerosene, Chemicals, Gasoline
Max pressure: 20 BAR
Standby time: 2 years
Flow range: 10-120 L/MIN
Single accumulation: 0.00-9999.9
Total accumulation: 0.00-999999.9
Unit: L, GAL, PTS, QTS
Zero set: RESET
Power Supply: 2 x AAA battery（batteries are not included）
The user can choose between two different operating modes:
Normal mode: Mode with display of Partial and Total dispensed quantities.
Flow rate mode: Mode with display of Flow Rate, as well as Partial dispensed quantity.
1.Wait for K24 to go to Standby, press the CAL and RESET keys together shortly. The set of the unit of measurement will appear on the screen at that time.（in this example Litres / Litres）
2.Press the RESET key to select the desired combination of unit of measurement, amongst those shown below.
3.Save the new combination by pressing the CAL key at length. K24 will pass through the start cycle and will then be ready to dispense in the set units.
Reseting and reset total:
1.Wait for the display to show normal standby display page(with total only displayed)
2.Press the reset key quickly
3.The meter starts to reset the partial
4.While the display page showing the reset total is displayed Press the reset key again for at least 1 second
5.The display screen again shows all the segments of the diaplay followed by all the switched-off segments and finally shows the display page where the reset Reset Total is shown.
NOTE: Our item's thread type is UK BSPP, NOT US NPT. Please make sure you can accept it before you bid.
1x K24 Turbine Digital Diesel Fuel Flow Meter
|Package Weight:||0.59 pounds|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by CBK, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
The Visi–Float flowmeter bodies are cut and precision machined from solid, clear acrylic plastic blocks. This construction not only produces a handsome finished product, but permits complete visual inspection. As a result, the Visi-Float flowmeters...
line of direct reading precision flowmeters incorporates many unique user features at moderate cost. These low cost flowmeters are ideal for general use.Service: Compatible gases and liquids.. Wetted Materials: Body: Polycarbonate; O-ring: Neoprene &...
The standard Model MMA flowmeter is suitable for both gas and liquid applications. It can be configured by the user with the parts provided to have non-removable top or bottom from mounted metering valves or no valve at all. The transparent nylon mat...
Offering advanced features at low cost, the Dwyer® Series MM flowmeters are ideal for a wide range of OEM and user application in medical equipment, air samplers, gas analyzers, pollution monitors, chemical injectors, cabinet purging, etc. The stand...
By Single Mom
mpn: Andy14082017-AmazonTools00018, ean: 0728897037526,
You can Monitor the Liquid system for the kit, also can Monitor the temperature of liquid or water of system. Flow Meter Dimension: 40x40x25mm (1.57*1.57*1") Connector will fit for pipe with 10mm (Id) Voltage of thermometer:DC 5V Package Included: 1 ...
mpn: 9803-88BA, ean: 0790304336638,
Allegro Flow Meter (5-30 LPM) 9803-88BARespiratory and Safety. Eye Protection. Personal Protective Equipment. ...
The Visi–Float® flowmeter bodies are cut and precision machined from solid, clear acrylic plastic blocks. This construction not only produces a handsome finished product, but permits complete visual inspection. As a result, the Visi-Float® flowme...
DWYER RMA-1-SSV 100PSI 130F MAX AIR 1/8 IN 0-0.5SCFH FLOWMETER B340474Fitting Size: 1/8 IN. Calibration (Min-Max): 0-0.5 SCFH. Type: Air. SKU: B340474 (SMM). ...
mpn: 9d922d7f6564ad34132babb3ea7d0132, ean: 0725566605673,
Description: - The features of the display are, 2 accumulations, resetting and accumulating and optional unit conversion of Gallon and Liter. - the high accuracy meter comes with 4 unit options Liters (L) /Gallons (GAL)/ Pints (PT)/ Quarts (QT). - It...
F-400 Features: Machined high quality acrylic, polished to a clear-as-glass finish Easy to read scale Designed for in-line installation Optional high/low level alarm...