Alvord Polk 128-0 Cobalt Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 1/4 Inch Oversize
Huge Savings Item! Save 11% on the Alvord Polk 128-0 Cobalt Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 1/4 Inch Oversize by Alvord Polk at Hosted Payload. MPN: 00324. Hurry! Limited time offer. Offer valid only while supplies last. The Alvord Polk 128-0 straight flute chucking reamer (also called a machine reamer) is a general purpose round shank tool made of cobalt steel with
The Alvord Polk 128-0 straight flute chucking reamer (also called a machine reamer) is a general purpose round shank tool made of cobalt steel with no finish or coating, and is most commonly chosen for reaming in high-temperatures generated by machining tough, hard materials applications, or with abrasive materials. Cobalt steel tools are good for machining stainless steel and nickel alloys, which are harder and generate more heat through friction, giving cobalt a longer-lasting sharp edge than an equivalent high-speed steel tool. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder.
Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. Cobalt steel is commonly chosen to make tools with exceptional wear resistance and temperature stability, and can be fed at higher rates than high-speed steel, while being more economical than carbide.
For reamers in the 128-0 series with 0.0280 – 0.1561 inches diameter there are four flutes, for 0.1562 – 0.5220 inches diameter there are six flutes, for 0.5221 – 0.8820 inches diameter there are eight flutes, for 0.8821 – 1.1950 inches diameter there are 10 flutes, and for 1.1951 – 1.5000 inches diameter, there are 12 flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 128-0 series except for those that are dowel-pin sized, in which case tolerances are +0.0000 -0.0002 inches.
Reamers are used to finish an existing hole. These holes are often adequate, but in some engineering applications the resulting hole is not round enough or is incorrectly sized, and therefore reaming is necessary. Reaming positively affects the mechanical properties of the hole by producing a hole with an exceptionally smooth finish and precise roundness and diameter. Reaming is often used before tapping screw threads.
Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.
Features & Highlights
- Straight flute reamers are recommended for general purpose reaming to make minor enlargements to existing holes with a very precise size and roundness
- Straight flute reamers are good for use in through or blind holes without interruptions such as keyways (through holes extend through the entire workpiece, while blind holes do not)
- Round shank tools are cylindrical and should be held in a good-quality toolholder in order to prevent the reamer from slipping in high torque applications, which can cause tool freeze, loss of accuracy, and tool damage
- Uncoated (bright) tools have no finish or coating. They are a good choice for general purpose applications
- Cobalt steel is used for tough machining applications and on materials such as cast iron, cast steel and heat-treated steel. Cobalt steel resists abrasion and high cutting temperatures and has higher feed rates compared to high-speed steel
|Package Weight:||0.05 pounds|
|Package Size:||0.5 x 0.3 x 0.3 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Alvord Polk, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: SA80-1-1/8, ean: 0846035009294,
Champion Cutting Tool SA80-1-1/4 Maintenance Reamers 3/4" Flatted Shank. Narrow Point Enables the Reamer to Fit into Small Holes. Five Cutting Edges Yield Quick and Efficient Results. Enlarge and Align Holes in Structural Steel, Including Stainless S...
By Precision Brand
Made from high quality low carbon steel. Thread Size M14x2.0, length 1 Meter. Plain oil finish. Threads are rolled under high pressure for greater strength. Most sizes packaged in sturdy tubes; all lengths can be bundled together or bulk packed on sk...
By Reamers - Hand Adjustable
Critchley type-Ideal for repair and automotive work. Takes the place of many individual size reamers. Can be used to progressively "open up" a hole.Size: 7A. Range: 9/32"-5/16". For hand use to open up holes.. Reamer is adjusted by loosening the nut ...
High Speed Steel Chucking Reamer Set with round shanks for use in milling machine, drill press and lathe tailstock chucks to machine holes to exact size. Includes 1/8, 3/16, 1/4, 5/16, 3/8, 7/16 and 1/2 inch sizes from 3-1/2 inches to 8 inches long i...
By Reamers - Straight Shank Chucking
For precise finishing of drilled through holes. Can be held in a chuck or a collet.Cutting Diameter: 5/8" - .001". Decimal Equivalent: 0.624. Overall Length: 9". Series 112S.. High Speed Steel. Straight Flute.. ...
mpn: DIB-275.00, ean: 0654207146445,
The Diamond Bead Reamer Set, exclusively from EURO TOOL, features three points and a 4-1/2" hollow handle in which to store them. Youll find the Diamond Bead Reamer set to be versatile, easier to use and trouble free. Made in the USA. The three diamo...
mpn: C30735, ean: 0697334307358,
Cleveland high-speed steel chucking reamers are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Uncoated tools feature just the base substrate without any additional treatment or coati...
By Alvord Polk
mpn: 08104, ean: 0662783081043,
The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms ...
By Accusize Industrial Tools
By Imperial Tool
mpn: 208F, ean: 0699244190464,
Reamer & deburring tool inner/outer.Reams both inside and outside edges of tube at a 60° included angle with 3 hardened cutting blades. Tough die cast body. Deburrs both clockwise and counterclockwise. Fluted body is shaped to fit comfortably in pal...