6-pack - Recessed Pan D-ring Trailer Tie Downs (6,000 Lb. Capacity) and Heavy Backer Plates, Including Mounting Hardware (Complete Set: 24 Carriage Bolts, Washers and Nylon Lock Nuts)
Free Shipping Included! 6-pack - Recessed Pan D-ring Trailer Tie Downs (6,000 Lb. Capacity) and Heavy Backer Plates, Including Mounting Hardware (Complete Set: 24 Carriage Bolts, Washers and Nylon Lock Nuts) by Farm Tough Tools at Hosted Payload. MPN: DR6000-P-6PK-HW. Hurry! Limited time offer. Offer valid only while supplies last. These tie-downs are for securing all of types of light or heavy loads and/or equipment. When installed, the surface is flush with the bed of your
These tie-downs are for securing all of types of light or heavy loads and/or equipment. When installed, the surface is flush with the bed of your truck or trailer. Each tie-down D-ring includes a large backer plate that helps to solidify and protect the bed material, while adding strength and rigidity.
Included in this set:
6 - Heavy-Duty (6,000 pound rating) recessed pan D-rings
6 - Over-sized backer plates (6 1/2" x 6 1/2")
24 - 3/8" x 2 1/2" Grade 5, zinc-plated, carriage bolts
24 - 3/8" zinc-plated flat washers
24 - 3/8" Grade 8, zinc-plated, nylon lock nuts
Detailed DIY installation guide
Weather Resistant Zinc Plating:
This set of D-Rings and all of the included hardware are zinc-plated for corrosion resistance and excellent protection from the elements.
Heavy-Duty Construction for the Toughest Hauling Jobs:
This set is simple enough to handle small tie-down jobs and tough enough to handle larger loads.
Each D-Ring has a load rating of 6,000 pounds.
Our large (6 1/2" x 6 1/2") heavy-duty backer plate adds additional protection and rigidity, preventing tear-through of your bed material.
High-quality mounting hardware is made from tough Grade 5 and Grade 8 steel.
Nylon-insert lock nuts assures your mounting will stay tight even with road vibrations.
The 2 1/2" carriage bolts can accommodate truck and trailer beds up to 1 5/8" thick.
Includes DIY Easy-To-Follow Installation Guide
We've included an installation guide that helps to walk you through the installation process, including recommended hole sizes, tool sizes and layout guidelines.
For easiest installation, we recommend having the following tools:
1/2" drill bit (15/32" could work, but requires more precision)
3 1/2" whole saw (3 1/4" could work, but requires some extra routing/chiseling)
9/16" wrench (a deep socket or ratchet wrench makes things go easier/quicker)
Features & Highlights
- Includes zinc-plated carriage bolts, washers and lock nuts for mounting, save a trip to the hardware
- All parts and hardware are zinc plated for corrosion resistance.
- Over-sized back-plate for extra strength and rigidity.
- 3/8" x 2 1/2" Grade 5 carriage bolts provide strength and low-profile mount.
- 3/8" Grade 8 Nylon insert lock nuts assure nuts won't vibrate loose.
|Manufacturer:||Farm Tough Tools|
|Brand:||Farm Tough Tools|
|Publisher:||Farm Tough Tools|
|Studio:||Farm Tough Tools|
|Item Weight:||15 pounds|
|Package Weight:||15 pounds|
|Package Size:||5.5 x 5.5 x 5.5 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Farm Tough Tools, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
Glarks high quality round head toggle bolt and wing nut assortment kit Specification: Product type: Toggle bolt and wing nut Meterial: Zinc plated steel Size: 1/8'', 3/16'', 1/4'' Feature: Zinc plated on the surface can keep them from rust and...
By RAW PRODUCTS CORP
mpn: 722703773233, ean: 0722703773233,
Carriage Bolt Zinc Plated 307A Grade A Steel - 3/8"-16 x 4-1/2" FT - Qty-100Carraige Bolt 304 Stainless Steel Fasteners. A carriage bolt, also known as a coach bolt, has a domed or countersunk head, and the shank is topped by a short square section u...
By Jet Fitting & Supply Corp
Jet Fitting & Supply Corporation has been selling Grade 2 Flat Countersunk Head Elevator Bolt, Zinc Cr+3 (Inch) since 1946. Trust in Jet to deliver you high quality fasteners!...
By RAW PRODUCTS CORP
mpn: 722703700833, ean: 0722703700833,
Carriage Bolt Hot Dipped Galvanized - 3/8"-16 x 6" FT - Qty-25Carraige Bolt 304 Stainless Steel Fasteners. A carriage bolt, also known as a coach bolt, has a domed or countersunk head, and the shank is topped by a short square section under the head....
The Wej-It Ankr-TITE ATS wedge anchor with 304 stainless steel body provides a secure hold in solid masonry and uncracked concrete, meets Federal Specifications QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1, and complies with Miami...
By The Hillman Group
mpn: 2893, ean: 0008236023992,
A tap bolt has a hex head and a smooth shoulder area beyond the standard amount of threading.Hex Tap Bolt also known as fully-threaded Hex Cap Screws, these bolts have a variety of uses for construction, agriculture and automotive applications. Avail...
sku: 461-541-DOR, mpn: 461-541, ean: 0019495615415,
SCRWCP MET M10-1.25X40...
mpn: OMER-OPN-895943, ean: 6624612032415,
MASTER Anchor Super Duty structural plastic and stainless steel anchor secures objects up to 300 lb. in drywall and will work in holes created by other anchors' failure. Supports low-profile or tilt-mount flatscreen TVs, bathroom partitions, commerc...
mpn: 811628, ean: 0008236132489,
Hex Bolts are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. This bolt is compatible with standard nuts and washers of the same thread pitch, grade, and finish. These bolts are fully threaded.They require a pre...
By Hard-to-Find Fastener
mpn: 014973230746, ean: 0738287010718,
We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and st...